Happy New Year from MSI!

We are shooting for the stars in 2022! As we head into the new year, stay tuned for information that will help you be even more efficient in your printing and bindery operations, as well as specials on parts and supplies to help you meet your budget. :-)

Happy Holidays from MSI!

Happy Thanksgiving!

As we head into the Thanksgiving Holiday week, MSI would like to share this thought with you....

Register & infeed tapes -Special Savings!

Check your folding machine belts for wear BEFORE they break!

Worn register belts can contribute to crooked folding, by impeding the paper path into the roller bank. Worn belts can also break (it seems to happen just when you have that job that has to get out!) so it is a good idea to keep an extra on hand to avoid potential downtime.

Stock up now on register and infeed tapes for Stahl, MBO and Baum folders and receive 10% off of our already low prices! Offer valid through November 30th, 2021. Contact Janice at (845) 897-2688 or folderparts@gmail.com to place your order.

• Please have part number, or machine make and model handy when ordering.

Check out MSI's folding Tip of the Month!

This tip is aimed at Baumfolder models and others that use tape spools, and register tapes to run the sheets down to the fold plates. Stay tuned for tips on MBO, stahl and Vijuk folder operation.

How much tension should be applied to the register tapes on my Baum folder?

The answer is, just enough to keep the tapes in place!
There is a tendency to over tighten the tape spools which are designed to keep the register tape pressure justsnug.More pressure will not help the paper track better, but will cause premature wear of the tape roll, bushings and tapes themselves.

Also, the wide tape under the marble holder is designed to angle in closer to the guide as it gets near the rollers. This helps the sheet register correctly and fold straight. Just be sure that the tape does not rub against the guide, or it will fray. This can cause registering problems due to the sheet catching as it travels down the table.

And, Even more Good News... If you purchase a register kit for any model Baumfolder, YOU'LL RECEIVE 5% OFF! Offer valid through November 30, 2021.
Kits include one set of register tapes, tape spools, and spool studs.

We hope this helps make your day a little easier :-)
If you have question you would like answered, just call, write or email us and we will present it in the next newsletter.

MSI Folder Parts- Good, Fast & Cheap!

“Jim Jarmusch once told me Good, Fast, and Cheap… pick two. If it’s fast and cheap it won’t be good. If it’s cheap and good, it won’t be fast. If it’s fast and good, it won’t be cheap. Fast, cheap and good … pick two words to live by.”
Tom Waits

Well, here at MSI we love a challenge! Since our beginnings in 1991, we have always strived to treat our customers the best that we can— and that means offering the highest quality service at the best prices. So if you are looking for all three things—“Good, Fast and Cheap”— then you’ve come to the right place.

Whether you need folder rollers, rebuild kit options, tires, belts, slitters, perfs, scores, and anything else for your folding machines, we can get it. We sell parts and offer service for *MBO, Stahl, Vijuk, Baum, Challenge and O&M folders, including older models and harder to find parts. If you have a technical or operational question rest assured we will not charge you for phone time! Our goal is to get you up and running.

*All brand names are registered trade marks of the respective manufacturers.

---

Contact us today to see how we can best serve you, or email us and receive a copy of our catalog.

Call (845) 897-2688 * Email: folderparts@gmail.com

* Website: msibinderyparts@gmail.com

Microcut Units for your Cutter!

MICROCUT Units for your paper cutter

Available through MSI!

What is Microcut?

Microcut is a state of the art system for controlling backgauge movement on any paper cutter, regardless of brand or size with an intuitive, easy to use operator interface. Today, microcut, a pioneer in computerized cutter automation, continues to lead the field with over 25,000 OEM and retrofit installations worldwide.

Models:

Microcut JR moves the backgauge into the correct position faster and more accurately than skilled manual operation. The confidence of computer-controlled precision translates into significant productivity increases - often 50% and more. Many paper cutters already have some form of automatic backgauge control, but may have become difficult and expensive to maintain. These machines are generally sound mechanically and, with the addition of microcut JR., can quickly and easily be returned to a high level of productivity and reliability for a fraction of the cost of a new machine.

Microcut PLUS WS is designed to automate backgauge movement on any paper cutter, regardless of brand or size. The benefits include increased productivity, greater accuracy, and improved reliability.foldjans

An easy-to-read liquid crystal display, featuring icons and symbols, guides the operator through all programming operations. Setup is fast and simple, with no complicated codes to memorize or reference. The current backgauge position is clearly displayed in inches, centimeters or millimeters, depending on operator preference.

Microcut COLOR WS

A full-color, 10" wide format touch screen display guides the operator, with all operations presented in an intuitive, easy-to- understand format. Setup is fast and simple, with no complicated codes to memorize or reference. The current backgauge position is clearly displayed in inches, centimeters or millimeters, depending on operator preference.

Microtrack II, part of the well-known family of microcut® automation systems, was specifically designed to increase the productivity and accuracy of manually operated paper cutters. It does so by eliminating the time consuming, error prone need for repetitious decision making, substituting in its place the accuracy and reliability of computer control. In addition to the above benefits, microtrack II is a cost-effective alternative to replacing damaged glass scales and older metal position indicator bands.

All microcut® systems are designed for ease of operation and years of trouble-free service. In the unlikely event service is required, on-board diagnostics, together with modular construction and plug-in connectors, insure Microsystem's ability to provide timely and responsive after-sale support.

Contact MSI Bindery Parts for more information: (845)-897-2688; folderparts@gmail.com

Cleanliness Is Next To Godliness

How many of us have heard this saying throughout our childhood? This certainly holds true for your folding machine rollers. Gunk and dirt can wreak havoc with your folder’s ability to run quality work. The urethane bands need extra TLC to maintain their proper composition. Our customers have had great success with VWM roller wash. Sold in one-gallon and five-gallon containers. Contact us for pricing at folderparts@gmail.com or call (845) 897-2688. Have a great day!

Slitters, Perfs and Score Blades For Your Folding Machines!

MSI can supply high quality slitter, perforator and score blades for most makes and models of folding machines, as well as the collars, holders and brass tip set screws to make complete assemblies.

Give us a call today and we’ll get you the stock you need. Discounted pricing for bulk orders over 25 pieces.

Contact us at folderparts@gmail.com or (845) 897-2688 and we will get you set up!

Waiting for spring sale!

Greetings everyone,

This has been a particularly long winter, especially for those living in colder climates. Word on the street is that things are starting to turnaround a little bit, and we want you to be ready.

Through the month of March, we are offering a 5% discount on all belts for your folding machines - whether you have an MBO, Stahl, Baum, O&M or Profold, we can help you save money and stock up on needed items all at the same time. Why wait until something breaks?

Let us know what you need and we will get right on it! Contact us at folderparts@gmail.com or (845) 897-2688.

Be well,

Janice

Paper Drill parts & supplies available from MSI!

We sell drill bits and parts for Baum, Challenge, Iram, Lawson, Nygren Dahley and Spinnet drills. Many sizes available. Drill blocks, (wood and plastic) and drill ease also available!
When ordering bits please specify overall length and drill capacity. 

Tips for keeping your paper drill operating at its best...

KEEP DRILLS SHARP!  Cleanliness is a must too! Clean the drill bits of all paper remnants after each use.
 
LUBRICATE DRILLS- Drill Ease sticks are an easy way to keep drill bits lubricated.
A light coat the inside of the bit is a good idea as well.

SET THE DRILLS CORRECTLY - The drills bit should just touch the block enough to make an impression and cleanly drill through the bottom sheet. After drilling, move the blocks or flip them over or turn them end for end to get a new cutting surface.

Call us for more info @ (845) 897-2688.
 If you have a service emergency please call (914) 475-4397.

Questions? Shoot us an email or give a call and we will do out best to try and help you remedy your situation. Suggestions? Are there any articles or "how to's" you would like to see in the Finish Line? Or, do you have any tips you have found helpful? Let us know and we will publish them in future editions!

Subscribe to receive our catalog and to hear about specials offered by MSI! Be sure to Like us and share on FaceBook!

MSI Will Keep You In Stitches!

We sell stitching wire
made in AMERICA!

High quality stitching wire for the printing and bindery trades.

This exclusive "Low-Tension" spooling system has become a standard for flawless stitching operations throughout the industry. Many options to choose from, and knowledgeable staff to help you make your selection.

Spools are available in a variety of colors, finishes and gauges:

Colors:
5lb. spools of blue, red, black and white. Inquire for additional options.

Finishes:

• Galvanized

• Tinned

• Copper Coated

• Liquor Finish

• Stainless Steel

• Nylon Coated

Gain an edge with MSI!

MSI's Paper Cutter Tip

Proper Lubrication is important to keep your paper cutter operating at it's best and will help minimize costly repairs.  Here are some handy tips to help you stay on top of maintenance.

Have a regular schedule for lubrication maintanence. Mornings are best to the lubricant can work into the machine.

Clean off old, dirty, excess grease. Excess can attract dust and grime which increases operating temperatures, leading to premature wear of hydraulic components.

Know where the oil and grease points are on your machine. Be sure the knife is down and machine is in power lock out before doing maintenance. 

Remove any panel covers and look for grease and oil locations.
Grease should be suitable for extreme pressure. Consult your cutter manual for model specifics.

Check out our newsletter, The Finish Line, for specials on Cutting blades and accessories through the month of October here: https://mailchi.mp/c40584544174/paper-cutter-parts-and-supplies-from-msi

Call us for more info @ (845) 897-2688.
Questions? Shoot us an email or give a call and we will do out best to try and help you remedy your situation. Suggestions? Are there any articles or "how to's" you would like to see in the Finish Line? Or, do you have any tips you have found helpful? Let us know and we will publish them in future editions!

Subscribe to receive our catalog to learn more about the products MSI offers for your folding needs.

Have You Lost Your Marbles?

MSI can help!

We sell marbles for all models and sections of Baum, MBO and Stahl folders, and ball holders for MBO’s. 

 If you order between September 1-30th,  you'll receive an additional 5% off of our already low prices!

Proper adjustment of marbles on your folding machine can mean the difference between a smooth running job and a nightmare. Give us a call within questions you may have regarding machine operation. We are here to help!

Contact Janice at folderparts@gmail.com or call (845)-897-2688 for more information or to order.

A Warm Hello

A warm hello to our family of customers!

As we head into the fall season of 2020, at MSI we want to know how we can help our customers for their particular situations. If you need parts for your folders, cutters, drills, let us know. Service is available as well. If you are short staffed and don’t have time to follow up on orders, re-orders, etc. we can help with that too…

• We’ll be posting and emailing special sales on popular parts and expendables, and now have face masks, hand sanitizer and nitrile gloves. Look for us on Facebook, and in your inbox for monthly specials.

• If you have Stahl and Baum folders that use replaceable grease cartridges, join our auto renewal program- we’ll send you cartridges at pre-determined intervals so you won’t run the risk of forgetting to order and replace these important components.

• We also sell parts kits for folders: Register kits (tapes, spools, spool studs) and replacement belt packages for your MBO/Stahl and Baum folders, as well as full rebuild kits for Baum, MBO and Stahl folders.

Please let us know how we can best serve you during these challenging times. We are just a phone call or email away.

Janice

New Beginnings- being resilient

* “The English philosopher Francis Bacon, who’s credited with developing the scientific method, wrote in 1620 that the three inventions that forever changed the world were gunpowder, the nautical compass and the printing press”.

The printing industry has been around for a very long time and pre-internet, is credited with being the best source of disseminating information, creating opportunity for people to read books and learn, and launching the original wide-spanning newspaper network. As machines and technology became more sophisticated, the industry that we know today has branched into many segments in addition to the general printer and bindery. The bindery itself, has far reaching effects despite the fact that the general population would be hard pressed to know just how much a folding machine, stitcher or paper cutter actually impacts their lives.

Although I would be considered relatively young in terms of my involvement in this industry (a scant 40 years compared to history), there are some things that jump out at me…

·     The folks in the printing and bindery industry are some of the most hard-working people you will ever know. And they are resilient too- Many are struggling right now. Some are mom and pop shops and others larger corporations. We are hopeful that things will turn around soon allowing everyone to get back on their feet and get, or keep the machines rolling. Keep the faith.

·      I believe printing will be around in some form or fashion for a long time to come even though the introduction to the internet and electronic communication has changed the way the printing industry operates.  There is still a need and a desire for things to be printed on paper. According to the NY Times, May 2019, “sales of printed books continue to rise to new highs, as do the number of independent stores stocked with these voices between covers, even as sales of electronic versions are declining”. 

·     Nothing quite replaces the feel of a good ‘old-fashioned’ paper book.  It is not only books that are becoming more popular.  Judging by the amount of marketing I get in my email inbox each day, and end up deleting without opening them, I can’t help but think that others have a similar experience. There are companies who are going back to sending a portion of their advertising in the form of direct mail, (ours included) to have more presence and be seen more easily. There is value in being able to keep your hands close to a piece of paper that you know you will want to reference again in the future. 

While we don’t know how the next few months will shake out, I am beginning to see some signs of life within our industry- more quotes coming in for parts and machine rebuilds; phone calls requesting general information, and businesses beginning to re-open and send employees back to work. It’s comforting, not only to me as small business trying to earn a living, but because I consider my customers my friends, and want them to succeed in whatever they choose to do going forward. We are here to help in the obvious way of providing parts and service, but also, and know that you have a fan club rooting for your success!

Janice

MSI Bindery Parts

  ·      *Full article can be found at History.com, 7 ways the printing press changed the world.
UPDATED:

SEP 3, 2019

ORIGINAL:

AUG 28, 2019

7 Ways the Printing Press Changed the World

We are here to help

MSI is continuing to be available for your bindery equipment parts and service needs, through these challenging times.

If you need a part for you folding machine, paper cutter, drill, stitcher, or need repair and installation work, give us a call -

Parts: (845) 897-2688.

Service: (914) 475-4397

Or Email us at folderparts@gmail.com
We are here to help

From your friends at MSI Bindery Parts & Service

A new year awaits...

We wish you peace and prosperity in the coming year. We are thankful for all of the friendships we have made over the years through MSI and look forward to helping serve you in the future.

Check back here frequently for our monthly specials. Be sure to mention the special when ordering to ensure your discount is received. And remember, if you have a question about your equipment or need troubleshooting with folder operation, give us a call! We are happy to help.

Happy New Year!

Momentum is key!

We hope that you had a safe and fun holiday season!

Now that the holiday season is over, there are choices that present themselves to us. The winter blues can arrive on the scene, OR we can be excited about new possibilities that await us.

In the workplace, creating and gaining momentum can take your business to the next level. At MSI we make it easy to start - we can help you plan ahead to keep your bindery equipment running smoothly and help you streamline a few of the repeated tasks that there never seems to be enough time for.

Here are few services that you might find helpful. And, of course, we are always available for conversation (we actually like to talk with our customers!) if you have any questions.

• Preventative maintenance agreements- unlike days of old, these can be tailored to meet the needs of your shop. A PMA for a machine running two shifts may not have the same specifications as one that runs only occasionally. Both machines need routine TLC and we can help you design a program to fit what you need.

• Auto renewal programs:

  • Grease cartridge replacement is an integral part of folder machine care and will extend the life of your machine. For Stahl and certain Baumfolder models that use these, MSI can set you up to receive grease cartridges on a pre-determined basis. No more forgetting to order - we take the guesswork out for you!

  • Replacement tires and belts- don’t wait until they dry out, crack and break… it is always a good idea to keep extra’s on hand to pre-empt needing an emergency order.

  So, start the new year off on your best foot. Let us know if you have any questions or would like more information about these services. (845) 897-2688. folderparts@gmail.com

So, start the new year off on your best foot. Let us know if you have any questions or would like more information about these services. (845) 897-2688. folderparts@gmail.com